PortStone Pavers are very easy to install especially when compared to ceramic tile or regular brick pavers. For proper adhesion to the subfloor, any paint (as seen below along the base boards), dirt or other debris must be removed prior to installation.
It is shown in a typical starting position beginning in a corner and against the wall.
The floor will be cleaned and then a bed of thin-set mortar will be applied using a 1/4" X 1/4" notched trowel. The section above is shown without the thin-set mortar to show the shape of the sheet more clearly. Notice the "cut-outs" made into the sheet so that all sheets "key" into each other. This makes alignment of even complex patterns quick and easy.