PORTSTONE THIN BRICK COLORS

NOW WITH FREE SHIPPING ON ALL ORDERS 300 SF or LARGER

With Reduced Flat Rate Shipping on Smaller Orders*

See our Shipping Zone Map here.

*See details and restrictions here.

Free shipping does not apply to PortStone Thin Brick Singles orders. Call or email for an accurate shipping quote for those orders.

The patterns and colors shown here are interchangeable.  For example, the Charleston shown here in the Herringbone pattern can also be done in Basketweave, Pinwheel, Runningbond, etc., or the Abbeville seen here in Runningbond can be done in Pinwheel, Basketweave, Herringbone, etc.   With a few exceptions, any of our colors can be done in any of our patterns. 

The colors shown here are shown as close to actual color as possible, however please be aware that these are photographic reproductions and as such may not be 100% accurate when compared to the actual product.  Also, all PortStone products are handmade so some variances in color, shading and texture are normal and to be expected.   PortStone Manufacturing Corp. does not guarantee any exactness of color or texture. We do guarantee all of our colors to be with our accepted parameters.  We strongly advise purchasing a sample to see your chosen color(s) first hand.  Each sample sent will be a close representation of the color chosen, however, your order may not be identical to the sample received in either color or texture.    

​

The first set of photos below are our PortStone for Floors colors.  Any of these colors can be done in any of our patterns with the exception of St. Louis.  We do not do St. Louis in Flagstone, Olde World Stone, and Riverstone.

​

Scroll down for our PortStone for Walls colors.  These colors are more textured than our floor brick products.  In addition to our colors that are exclusively for use on walls, we can also do any of our floor brick colors for use on wall as well.

​

​

PortStone Thin Brick Colors

Color:  Abbeville

Pattern shown here:  Runningbond

$8.25 SF

Color:  Baton Rouge

Pattern: Runningbond

$8.25 SF

Color:  Frosted Charcoal

Pattern shown here: Face Brick

$8.25 SF

Temporarily

Unavailable 

Color:  Pickett's Mill

Pattern shown here: Flagstone

TEMPORARILY DISCONTINUED

Color:  St. Louis

Pattern shown here: Herringbone

$9.25 SF

Temporarily

Unavailable 

Color:  Acadian

Pattern shown here:  Herringbone

$8.25 SF

Color:  Camden Hill

Pattern shown here: Face Brick

$8.25 SF

Color:  New Castle

Pattern shown here: Large Runningbond

$9.25 SF

Color:  Richmond

Pattern shown here: Runningbond

$8.25 SF

Color:  Windsor

Pattern shown here: Large Runningbond

$8.25 SF

Color:  Antique Charcoal

Pattern shown here: Face Brick

$8.25 SF

Color:  Charleston

Pattern shown here:  Herringbone  

$8.25 SF

Color:  Old Chicago

Pattern shown here: Basketweave

$8.25 SF

Color:  Rose Hill

Pattern shown here: Face Brick

$9.95 SF

Color:  Unfinished Paintable

Pattern shown here: Face Brick

$7.50 per sq. ft.

​

INTRODUCING NEW PORTSTONE THIN BRICK SINGLES

Unlike regular PortStone Thin Brick which is made in sheets of 8 bricks each, 1/4" thick with the bricks connected by woven fiberglass mesh made into the back of each brick, PortStone Thin Brick Singles are single bricks, approximately 1/2" thick.  PortStone Singles come in 2 sizes, 2 1/4" X 8 1/4" which is typically used on wall, and  4" X 8", typically used for floors and patios.  Our Thin Brick Singles are priced by the square foot and sold in boxes containing 10 sq. ft. each and are available sealed or unsealed.  All photos are shown sealed.

(Coverage is based on using a grout joint width of 1/2".)