PortStone Prices & Ordering Information

NOW WITH FREE SHIPPING ON ALL ORDERS GREATER THAN 300 SF

With Reduced Flat-Rate Shipping on Smaller Orders

See Our Reduced Rate Zoned Shipping map below for order less than 300 SF

PLEASE NOTE: WE NO LONGER SHIP TO THE STATES OF CALIFORNIA, OREGON AND WASHINGTON

Pick your color and pick your pattern. All PortStone Thin Brick products are made to order. When you place your order, your PortStone Thin Brick is manufactured specifically for you. When you are ready to order, or even if you simply have more questions, just give us a call at 601-922-0902. We will be happy to answer any questions you may have and help you through the very simple ordering process.

The prices listed below apply only to orders placed directly with PortStone Manufacturing Corp. All PortStone dealers are independent businesses and as such set their prices as they see fit.

OTHER MATERIAL NEEDED TO COMPLETE YOUR FLOOR

For interior floors, you will also need some sealer and floor finish. These are two separate items and both are very easy to apply. (See PortStone installation instructions). Both the sealer and floor finish are ordered from us when you order your PortStone floor. You will also need thin-set mortar and grout. We carry a very good grade of polymer modified, flexible multi-purpose thin-set mortar which works extremely well with PortStone. We also carry a grout mix that is specially formulated to handle the grout joint widths typically found in PortStone Thin Brick floors. Since the vast majority of all PortStone floors are grouted with Natural Grey grout, this is the only color we carry. You can, of course, use any color sanded grout you choose, but please bear in mind that grout colors other than natural grey can significantly change the look of your PortStone Thin Brick floors and some grouts are not designed to withstand the grout widths found in a typical PortStone floor.

WE DO NOT RECOMMEND THE USE OF EPOXY GROUTS. WE ALSO DO NOT RECOMMEND USING SPECTRALOCK GROUT MIX WITH PORTSTONE. WE ALSO DO NOT RECOMMEND USING ANY OF THE ALL-IN-ONE TYPE GROUTS. THE COLORANT AND SEALERS USED IN THESE GROUT MIXES STICK LIKE WET STICKY PAINT TO THE SURFACE OF PORTSTONE AND IS VERY DIFFICULT TO REMOVE.

We recommend adding a waste factor of approximately 8% to allow for cuts and minimal breakage to your order to help insure you have enough material to complete your project.

Scroll down for more information about coverage rates and how to place an order.

CHECK OUT OUR CLEARANCE PAGE FOR SPECIAL DEALS

ON SELECTED PORTSTONE THIN BRICK MATERIAL

Samples are $25.00 each including shipping.

NOW WITH FREE SHIPPING ON ALL ORDERS GREATER THAN 300 SF

With Reduced Flat-Rate Shipping on Smaller Orders

See Our Shipping Zoned Rate map below

PORTSTONE THIN BRICK PRICES

Abbeville Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Antique Charcoal Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300SF!

Autumn Brown Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Baton Rouge Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Camden Hill Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Charleston Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Frosted Charcoal Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

New Castle Was $9.25 NOW $8.95 with FREE SHIPPING for orders over 300 SF!

Old Chicago Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Pickett's Mill Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

Richmond Was $8.25 NOW $7.9 with FREE SHIPPING for orders over 300 SF!

Sandstone Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

St. Louis Was $9.25 NOW $8.95 with FREE SHIPPING for orders over 300 SF!

Rose Hill Was $8.25 NOW $8.95 with FREE SHIPPING for orders over 300 SF!

Windsor Was $8.25 NOW $7.95 with FREE SHIPPING for orders over 300 SF!

NEW!!!

Unfinished Paintable Brick For Walls

Heavily Textured $7.50 with FREE SHIPPING for orders over 300 SF!

Lightly Textured $7.00 with FREE SHIPPING for orders over 300 SF!

SEALER, FLOOR FINISH and OTHER ITEMS

PortStone SC-25 Paver Seal - Solvent Based $ 53.50 Gallon 300 SF coverage per Gal

PortStone WB-25 Sealer - Water Based $ 57.50 Gallon 300 SF coverage per Gal

PortStone Super Wax Floor Finish $ 45.50 Gallon 800-900 SF per Gal

Matte Floor Finish $ 49.50 Gallon 800-900 SF per Gal

Super Grip Anti Slip Additive $ 14.50 per 8 oz. bottle

approx. 300 SF

PortStone Brick & Tile Grout $ 21.75 per 50# approx. 90 SF per 50# bag

Thinset Mortar (Polymer Modified) $ 21.75 per 50# approx 100 sf per 50# bag

Corner Brick - in any color $ 20.00 per linear foot

Nose Brick - in any color $ 16.50 per linear foot

ZONE 1

50 - 100 SF = $150.00

101 - 250 SF = $100.00

251 - 299 SF = $50.00

300 SF and above = FREE SHIPPING

ZONE 2

50 - 100 SF =$175.00

101 - 200 SF = $150.00

201 - 250 SF = $100.00

251 - 300 SF = $50.00

300 SF and above = FREE SHIPPING

ZONE 3

50 - 100 SF = $200.00

101 - 200 SF = $175.00

201 - 250 SF = $125.00

251 - 299 SF = $75.00

300 SF and above = FREE SHIPPING

ZONE 4

50 - 100 SF = $250.00

101 - 200 SF = $200.00

201 - 250 SF = $150.00

251 - 299 SF = $100.00

300 SF and above = FREE SHIPPING

All patterns and colors are sold by the square foot with the exception of our border patterns which are sold by the linear foot. The border pattern price per linear foot is the same per linear foot as the regular patterns are per square foot in the color chosen.

There is a $13.50 per pallet crating charge on all orders. Orders of 450 sq. ft. or more may require 2 or more crates.

Note: Due to the nature of the pattern, Promenade is ordered by the section. We suggest that an accurate diagram with all dimensions of the area to be covered be faxed to PMC so that we can give an exact quote for the material required based on the dimensions given.

The minimum order quantity is 100 sq, ft, for each color ordered.

Call for pricing on custom colors. Custom color samples are $150.00 minimum and are non-refundable.

PortStone Mfg. Corp. does not guarantee any exact match on any custom colors.

Logos and other specialty items - call for pricing.

When installing PortStone over a wooden subfloor, Cement type backer boards are not recommended for PortStone installations. We do recommend the use of isolation membranes such as Ditra and ProvaFlex. We do not carry these, but they can be purchased locally at most any Lowe's or Home Depot store.

All orders are shipped on pallets in the quantity ordered.

Weight is approximately 2.6 lbs to 3.0 lbs per sq. ft. depending on the pattern and/or color chosen.

Expect some color and texture variations from order to order. Be sure to order enough to complete the job.

PortStone Mfg. Corp. does not guarantee any exact color matching on any product.

Please allow 2 - 3 weeks manufacturing time prior to shipping.

Pricing does not include shipping. Please call for shipping quote.

Payment is due when order is placed unless previous arrangements have been made.

WE DO NOT RECOMMEND THE USE OF EPOXY GROUTS. WE ALSO DO NOT RECOMMEND USING SPECTRALOCK GROUT MIX WITH PORTSTONE.

SEALER, FLOOR FINISH, THIN-SET & GROUT COVERAGE:

PortStone SC-25 Brick Floor Sealer (25% solids content solvent based) - approxmately 300 sq. ft. coverage per gal. 1 coat on interior floors, 2 coats for exterior use. An anti-slip additive MUST be used on all exterior surfaces intended for foot traffic.

PortStone Water Based Sealer (25% solids content) - approximately 300 sq. ft. coverage per gal. 1 coat on interior floors, 2 coats for exterior use. An anti-slip additive MUST be used on all exterior surfaces intended for foot traffic.

Super Wax Floor Finish - 800 - 900 sq. ft. coverage per gallon per coat - 2 coat minimum on interior floors.

Thin-set Mortar - approx. 90 sq. ft. coverage per 50 lb. bag.

Grout Mix - approx. 90 sq. ft. coverage per 50 lb bag depending on the pattern chosen.